Our Filter Cartridges

Universal Filtration manufactures a wide range of Filter Cartridges to meet your needs for liquid filtration. Our Filter Cartridges are designed to be excellent for use in the filtration of liquids in various industries.

We manufacture and fulfill orders globally. Our customers choose from either our standard catalogue of Filter Cartridges, or order from us their own specified Filter Cartridge requirements, depending on specifications.

sergserg
Filter Cartridge Steel
456465123

Our Standard Catalogue

Choose from our range of Filter Cartridge selections. Browse our brochures for more information regarding each filter bag selection. Our Filter Cartridges are fabricated with industry leading techniques, and are excellent for use in surface and liquid filtration for a wide range of applications, from food and beverage to fine chemical filtration. Our Filter Cartridges are suitable for pre-filtration, end-filtration or as a polishing filter for liquids with low concentration of solids.

High Flow Pleated Filter Cartridge – UHF Series

UHF High Flow Pleated Filter Cartridge is a large diameter, coreless single open end pleated cartridge designed to reduce your system investment cost, disposal
cost as well as long service life. You can reduce up to 50% of filter system and save up to 60% of change out times compared with conventional cartridge system, and give you a better sealing to ensure a perfect filtration.

UHF_Universal_High_Flow_Filter_Cartridge

 

 

e

Cross Flow Pleated Filter Cartridge – UCF Series

UCF Cross Flow Pleated Filter Cartridge made of polypropylene micro-fiber membrane, use a unique radical pleat technology to make very large surface area possible in one single cartridge. Applications include Pre-filtration of RO, Sea Water Desalination Condensate Water, and Solvent filtration for Micro-electronics.

UCF_Cross_Flow_Filter_Cartridge

 

 

e

Super High Flow Pleated Filter Cartridge – UHP Series

Super High Flow Pleated Filter Cartridge made of polypropylene and glass fiber micro-fiber to make very large surface area possible in one single cartridge. High dirt loading capacity for longer service life and cut down your overall filtration cost. Reduce your filtration capital investment with smaller cartridge vessel to meet the same flow rate No by pass risk – Best sealing with single open end connection configuration.

UHP_High_Flow-P_Filter Cartridge

 

 

 

e

Unique Pleated Filter Cartridge – UBC Series

This unique Filter Cartridge made of polypropylene Able to convert your existing bag filter system to Cartridge system instantly to take advantage of higher flow due to more filtration surface area.High dirt loading capacity for longer service life and cut down your overall filtration cost. Reduce your filtration capital investment with smaller cartridge vessel to meet the same flow rate

 UBC_High_Flow_Pleated_Filter_Cartridge

 

 

e

PP Melt Blown Filter Cartridge – UMB Series

Universal Melt Blown Cartridge – our high performance polypropylene melt blown filters are manufactured under computer controlled process produces an extraordinarily consistent products quality. Our cartridge comes in three progressive depth structures -the inner fibers are extremely fine and compact to capture fine particulates. The fibers in the middle and outer areas are larger in diameter and less density, more porosity, which give an excellent property of low pressure drop and high contaminant dirt holding capacity. Besides that this cartridge also it give you higher surface area and non-fiber releasing

 UMB_PP_Melt_Blown_Filter_Cartridge

 

 

 

e

Polyolefin Filter Cartridge – UGD Series

Unique multi-component / multi-layers structure with graded density to meet your stringent demand for quality filtration, the graded density thermally bonded the non-woven fabric layers with pre and final layers of filtration to capture more particles and allows to have high flow rate as well as higher filtration efficiency

100% pure polyolefin, no surfactants and binders used in manufacturing process, therefore no foaming issue.

FDA complianc

 UGD_Polyolefin_High_performance_cartridge

 

 

e

String Wound Filter Cartridge – USW Series

USW series string wound filter cartridge is a premiumperformance filtration product. It is the result of combining computer-aided design and production process to create exact diamond-shaped depth filtration cones. Unique structured loose outer layers and tight inner layers offers depth filtration that gives you high dirt holding capacity

 USW_String_Wound_Filter_Cartridge

 

 

e

Activated Carbon Filter Cartridge – UAC Series

Universal Activated Carbon cartridges are made of high adsorptive carbon powder and granular activated carbon, compressing continuously to be an extrusion. Including superior absorbability and filtration efficiency, it features stable pressure drop with long service time. Activated Carbon cartridges offer an economical solution for your general water filtration needs and industrial process proposes.

 UAC_Activated_Carbon_Filter_Cartridge

 

 

e

Nylon 6 Filter Cartridge – UN6 Series

Our Nylon membrane cartridge provides wide system compatibility and absolute rated efficiency, yielding the cleanest possible process fluids in a variety of semiconductor applications. Naturally hydrophilic nylon membrane cartridges require no pre-wetting and are ready to use. Each cartridge module is also individually tested for integrity.

UN6_Nylon_6_Pleated_Absolute_Rated_Filter_Cartridge

 

 

e

PES Membrane Filter Cartridge – UPES Series

Our Absolute Rated Hydrophilic Polyethersulfone PES membrane cartridge are designed for mirco-electronic industry applications, itshigh flow and high particle retention characteristic are due to its highly asymmetric pore structure. All cartridges are manufactured in clean room environment using US produced membrane material, every piece of filter cartridge are challenged in 100% integrity test with 18 mega -ohm high purity DI water, and compile to FDA biological safety standard.

UPES_PES_Pleated_Absolute_Rated_Filter_Cartridge

 

 

e

Polypropylene Pleated Filter Cartridge – UPL Series

Our UPL series PP Pleated Cartridge delivers high efficiency and consistent filtration for wide range of critical applications. Removal of particles from 0.1 to 50 micron, available in both nominal and absolute rating. High surface area ensures long service life and low initial pressure loss Excellent chemical compatibility, suitable for solvent and acid / alkaline applications.

UPL_PP_Pleated_Filter_Cartridge

 

e

PTFE Membrane Filter Cartridge – UPTFE Series

It is constructed of hydrophobic Polytetrafluotoethylene membrane media for your critical application. Hydrophobic PTFE Membrane media High flow and low pressure drop No fiber release 100% integrity tested FDA compliance material.

UPTFE_PTFE_Pleated_Absolute_Rated_Filter_Cartridge

 

 

e

Cylindrical Stainless Steel Cartridge – USC Series

Our Cylinder Filter Cartridges are made with FiveLayers Sintered Wire Cloth, with filter rating ranging from 0.2micron to 200micron. Five-Layer Sintered stainless steel wire mesh are sintered together in vacuum to give you a very fine micron filtering, good permeability, high strength, easy to clean, good corrosion resistance, durable at work and no immigration of materials.

USC _Stainless_Steel_Sintered_Filter_Cartridge

 

 

e

Pleated Stainless Steel Cartridge – USCP Series

Our pleated filter cartridges are made of stainless steel fiber web and stainless steel weaving wire mesh. Stainless steel sintered fiber web is a multi-pore filter media. The filter elements gives you the advantage of high porosity, large filter area and high dirt holding capacity, and can also be clean and reused by chemical cleaning or ultrasonic cleaning methods. Filter rating range from 3 to 200 microns

USCP_Stainless_Steel_Pleated_Filter_Cartridge

 

 

e

Our materials, size, modifications available

We offer our clients the ability to customise their cartridge filter housing requirements based on their needs. Since we manufacture our cartridge filter housings from start to finish, we enable a full suite of customisations and options available to our customers. Browse our available options, or provide us a suitable drawing or an engineering draft, and email us an inquiry.

Customisable options example

For example, for a filter cartridge, various options are available:

  • Steel casting material SS304, SS316, etc
  • Micron Rating
  • Length of cartridge
  • Connection type
  • Seal Material O-Ring

How to order from Us

We fulfill and ship orders globally for orders of all sizes. Many of our customers receive their orders through either a sea freight arrangement or through air freight, or courier for smaller packages. To order from us, select a model or product line, choose your required custom options and write to us at Sales-inquiry@universal-filtration.com. For inquiry or for custom designs, contact us and write to us regarding your specifications. We would be keen to have a look at your filtration requirements at Sales-inquiry@universal-filtration.com.

From Catalogue

Select from our catalogue one of our Cartridge Filter Vessel series which suits your filtration needs. We ensure that each Cartridge Filter Vessel series is suited best for its designed purpose, whether it is for heavy duty filtration or for fine chemical filtration.

After you have chosen your Cartridge Filter Vessel series for your desired filtration requirement, select your material, size, and modifications which suits your Cartridge Filter Vessel. Our Cartridge Filter Vessel are compatible with cartridges from industry names like Eaton and Hayward.

If you are still unsure of your requirements, send us an email at sales-inquiry@universal-filtration.com detailing your needs and our team will recommend a Cartridge Filter Vessel selection most suitable for your needs.

If you have a Cartridge Filter Vessel selection in mind, please email us at Sales-Inquiry@universal-filtration.com for us to give you a quote. We fulfill orders globally, and cater to both large and small companies and organisations.

Custom selection

If you have requirements and would like help from our staff, please email us an inquiry regarding your specific needs, to Sales-Inquiry@universal-filtration.com. Our team would be keen to meet your filtration requirements.

We give our customers the ability to modify and customise their Cartridge Filter Vessel selection based on their needs. If you have a specific need, such as a specific length and dimension for your housing, please feel free to contact us at Sales-Inquiry@universal-filtration.com, if you have an engineering drawing you would like us to fabricate. Our team would be more than happy to assist your requirements.

If you are still unsure of your requirements, send us an email at sales-inquiry@universal-filtration.com detailing your needs and our team will recommend a Cartridge Filter Vessel selection most suitable for your needs.

If you have a Cartridge Filter Vessel selection in mind, please email us at Sales-Inquiry@universal-filtration.com for us to give you a quote. We fulfill orders globally, and cater to both large and small companies and organisations.

Contact Us

We’re always interested in new projects, big or small. Please don’t hesitate to get in touch with us regarding your project.

If you want to contact us for a quote or inquiry please call or message us on our corporate whatsapp (+65) 8914 3563 or send us an email at Sales-Inquiry@universal-filtration.com. If you would like to submit a proposal for consideration simply email us a quote.